Services

Cold Applied Liquid Waterproofing

It's easy to see why cold-applied liquid waterproofing systems are becoming increasingly popular for Cornish new-build and restoration projects.  Versatile and highly flexible, these coatings form a seamless barrier on even the most complex structures on private or commercial properties, as long as the surface is correctly prepared and detailed.

Cold-applied liquid waterproofing solutions are generally made of polyurethane/resin and, when used on walkways and balconies, can include a skid inhibitor for added safety.  The products can be applied over a variety of surfaces, including asphalt, felt, concrete, and even steel, depending on the substrate condition and whether a compatible primer is used.  This makes them ideal for flat roof repairs where, provided the underlying structure is sound and confirmed by survey, the waterproofing layer can often be applied directly over the old surface.

Cold-applied liquid waterproofing systems are also in demand for new-build projects, from balconies and rooftops to floors and even car park roofs, provided the specific system is designed and specified for the intended level of pedestrian or vehicle use.  With a range of colours and the option to add chips for surface texture, this system is flexible and versatile.

Men applying waterproofing to roof with scaffolding built around

What is cold-applied liquid waterproofing?

Cold-applied liquid waterproofing refers to resin- or polyurethane-based products applied wet with a brush, roller, or trowel and cured in place into a continuous membrane. Unlike torch-applied felt or hot mastic asphalt, these systems involve no naked flame, which is why they're described as “cold-applied.”

It's worth distinguishing between a basic liquid coating and a complete liquid-applied waterproofing system. A single-layer coating without reinforcement is generally intended to refresh an existing sound surface rather than serve as a primary waterproofing layer. A complete system typically includes a primer suited to the substrate, reinforcement (usually a glass-fibre or polyester mat) at upstands, outlets and other vulnerable details, one or more coats of the liquid resin, and a protective or UV-stable topcoat.

Because the material is applied as a liquid, it can flow around complex roof shapes and penetrations without the cut-sheet joints that sheet materials require in these areas. This reduces reliance on lapped joints, but it doesn't remove the need for proper preparation, priming, and detailing: a liquid system is only as good as the workmanship beneath it.

How is liquid waterproofing installed?

The exact build-up depends on the product specification, substrate and intended use of the finished area, but a liquid system is generally installed in the following stages:

  • Survey and assessment of the existing roof or substrate
  • Cleaning and preparation of the surface
  • Repairs to any cracks, movement joints or damaged areas identified
  • Application of an appropriate primer
  • Reinforcement of upstands, outlets and other detailed points where specified
  • Application of the liquid waterproofing membrane, built up to the required thickness
  • Application of a topcoat, with an aggregate or non-slip finish where needed
  • Inspection of the finished system and detailing before handover

Weather and temperature affect several of these stages: most systems need a dry substrate and minimum temperatures to cure properly, and application is usually paused in rain or very cold conditions unless the specific product is formulated for that purpose.

Where can it be used?

Beyond the balconies, rooftops, floors, and car park roofs mentioned above, liquid systems are also well suited to flat roof refurbishment, complex roof shapes with multiple penetrations, and walkways or maintenance access routes. In every case, pedestrian or vehicle use needs a matched system build-up and finish: a coating specified for occasional maintenance access shouldn't be assumed suitable for daily foot traffic, and a pedestrian-grade system shouldn't be assumed suitable for vehicles.

What surfaces can it be applied to?

As above, cold-applied liquid systems can generally be used over asphalt, felt, concrete and steel, but “can be applied to” isn't the same as “should always be applied to.” Suitability depends on the condition of the substrate, any existing coatings or membranes, adhesion, moisture levels, movement, and contamination, as well as the chosen primer and system specification. An existing roof shouldn't simply be coated without first checking that the deck, insulation, falls and drainage are in a suitable condition, which is what a survey is for.

Other advantages of Cold applied liquid waterproofing systems include:

Cost

Because Cold Applied Liquid Roofing can be applied over a range of surfaces and has a fast curing time, repairs can be carried out in minimal time. As these coatings approach the end of their useful life, an application of a primer followed by a single coat can prolong the life of the surface for a further period. Guarantees range from 10-20 years.

Versatility

Liquid application not only provides a seamless surface, it also brings smooth coverage in areas which have complex shapes or protuberances.  This makes this product particularly useful on non-domestic flat roofs or where guttering or stepped roofing require flexibility of roofing cover.  When a rougher or non-slip surface is required, the addition of chippings can provide good non-slip protection.

Safety

With a cold application there is no risk of fire on application, which is a genuine benefit on occupied or sensitive sites, though general site fire safety still applies as with any construction project. In addition, the nature of the polyurethane material makes it ideal for use as a floor covering in areas where hygiene is of the essence, such as in hospitals or food preparation areas, though the specific product used should be confirmed as suitable for that purpose.

We work closely with architects and builders to design the optimum solution and can provide suggested roof plans for any scenario. For more information on Cold Applied Liquid waterproofing solutions or to discuss how your new build/renovation project might benefit from this system give us a ring on: 07786 882872 or e-mail us at enquiries@pellowroofing.co.uk.

Frequently Asked Questions

Cold applied waterproofing applied to patio
Cold applied waterproofing applied to flat surface
Cold applied waterproofing applied to a surface
Man applying waterproofing to a roof
Close up of cold applied waterproofing applied to patio
Whether you are looking to add a green roof to your shed, repair a leaking balcony, or re-roof a large industrial complex; feel free to contact us for a no-obligation quote

Don't take our word for it...

What our customers have to say about us

Drew & Jo Thacker

Hi James,

Have to say with all the work I've done to the house in the last 6 months, your job was the easiest and most pleasing money I've spent.

Great job, pleasure to work with your company and a great result.

Ta muchly and be assured I'll recommend you and your team in a heartbeat.

Best Regards

Illric

I called five roofing companies only one eventually returned my call three weeks later, except for one - Pellows. My call was answered in person when l phoned, an appointment was made for the same week and the new roof was completed within the month. The quality and care of the workmanship and the impressive responsiveness to any concerns l had were immediately attended to by the skilled very experienced and highly personable Pellows team . I am delighted by the whole experience and l have a superb brand new roof.

I hope you this can be useful to you. Many thanks
Best wishes

Peter & Diana Louth

– St Mawes

Hi Ken & James,

We would like to give you a huge thank you for your commitment and effort to get our roof done in difficult conditions. You will be delighted (but not surprised, I suspect) to know that it proved totally weatherproof over the weekend – which was a great pleasure for us.

Thank you again,
Best regards

Joan Wells

– Carnon Downs

Dear James and Ken,

Many, many thanks for a superb job very quickly and efficiently done! Rest assured I will be singing your praises from the rooftops (sorry, couldn’t resist that one… Winking smile ) and recommending you to whomever I come across who needs flat roofing work done.

Brilliant – and I hope business keeps getting bigger and better for you!

All the best, and see you around.

Jennifer Gayle

– Chacewater

Dear James & Ken,

Thank you very much for your prompt and efficient service in carrying out the emergency flat roof repairs to our holiday let in St Agnes which enabled us to keep things open and running as normal.

Thanks again
kind regards

John Taylor

– London

Dear James & Ken,

Thank you for the work you carried out on my mothers property in Threemilestone. We were equally impressed by the way you went about the job and the tidy state that you left the property in when you were done. I don’t think either of us would think twice about using your company again or recommending you to anyone looking for a flat roofing firm.

Best wishes for the future

Duncan Spires

- Field Technician, Danosa

Dear James & Ken,


I would like to say that the installations you are producing are excellent and it is always great to see a contractor taking such pride in there work.

Alwitra logo
Danosa logo
Kemper System logo
Resitrix logo
NFRC_logo
Bauder approved contractor logo.