Best Roofing Systems for Roof Terraces in Cornwall

A roof terrace needs more than a flat roof that simply keeps the building dry.

The complete roof may need to support people, furniture, paving, decking and planters. It must also remain safe underfoot, withstand regular use and allow rainwater to drain without collecting around doors or other vulnerable areas.

So, which roofing system is best for a roof terrace in Cornwall?

No single system suits every property. GRP fibreglass can work well for a smaller terrace with an exposed finish, while reinforced liquid waterproofing is often better suited to complex roofs. Where you plan to install paving or decking, a protected membrane system may be more appropriate.

The correct choice depends on the entire terrace design, not just the waterproofing material.

Why Roof Terraces Need Specialist Waterproofing

A standard flat roof may only be accessed occasionally for maintenance. A roof terrace or balcony will be walked on regularly and may carry considerably more weight.

Before converting a flat roof into a terrace, you must assess the structure. It may need to support occupants, outdoor furniture, paving, decking, planters and balustrades, as well as the roofing system itself.

Regular pedestrian use also creates wear that an ordinary exposed roof covering may not be designed to withstand.

Suitable slip resistance, edge protection and drainage must therefore be considered from the beginning. An existing flat roof should never automatically be assumed to be suitable for terrace use.

The Waterproofing and Walking Surface May Be Separate

Some roof terrace systems provide both waterproofing and a walking surface. A traffic-rated liquid system or GRP roof terrace, for example, can include a non-slip finish.

Other terraces use separate layers:

  • A waterproof membrane underneath
  • Paving, decking or compatible walkway tiles above

Paving on pedestals or decking on suitable supports can protect the waterproofing while allowing rainwater to drain below the visible surface. You can also lift individual sections when you need access for inspection or maintenance.

Supports should not simply be mechanically fixed through a completed membrane. Their position and installation method must be part of the original waterproofing design.

Why Cornwall’s Weather Matters

Many coastal areas receive approximately 900 to 1,000 mm of rainfall annually, while upland locations can receive considerably more. Reliable roof terrace drainage and wet-surface slip resistance are therefore particularly important.

Exposed coastal properties may also experience stronger winds and salt-laden air. Wind uplift can affect membranes, paving, decking and roof-edge details, while salt exposure may influence the choice of metal fixings, trims and balustrades.

A sheltered inland terrace will not necessarily need the same specification as a roof overlooking the coast.

GRP Fibreglass Roof Terraces

GRP fibreglass roofing creates a hard, seamless waterproof finish. When properly specified, it can be a strong option for smaller domestic terraces and balconies.

A non-slip topcoat can provide a practical exposed walking surface without the additional height or weight of paving.

However, not every GRP roof is suitable for regular pedestrian use. The structural deck must be stable, correctly prepared and capable of carrying the expected load. GRP is relatively rigid, so substrate movement and detailed areas must be carefully managed.

The complete deck, laminate and surface finish should be designed specifically for terrace use.

Liquid Waterproofing for Complex Terraces

Cold-applied liquid waterproofing is particularly useful where a terrace contains numerous corners, steps, doorways, outlets, parapets, rooflights or other penetrations.

The reinforced liquid material forms a continuous waterproof layer around these detailed areas. Some systems can include an aggregate or specialist non-slip finish, while others are designed to sit beneath paving or decking.

Cold application also avoids the need for hot works. However, liquid products vary, so the selected system must suit its intended level of foot traffic.

This flexibility often makes liquid waterproofing a practical choice for refurbishment projects and irregularly shaped balconies.

Mastic Asphalt for Hard-Wearing Areas

Mastic asphalt is a traditional but still highly relevant option for terraces, balconies, steps and walkways.

It forms a durable waterproof covering and can be applied around complex, detailed areas. This makes it useful where the terrace includes steps, level changes, or sections requiring a particularly hard-wearing finish.

Mastic asphalt is heavier than many membrane systems, so you must assess the structure. Specialist installation and the correct pedestrian surface or protection are also required.

EPDM, Single-Ply and Built-Up Felt

EPDM rubber roofing, single-ply roofing and modern built-up felt can all provide effective waterproofing beneath a protected terrace surface.

These systems are generally more suitable when paving, decking or walkway tiles protect the membrane from regular direct foot traffic.

This arrangement can create a level-looking terrace while the waterproofing beneath remains laid to falls. Wind-load considerations are particularly important for membranes and terrace finishes on exposed properties.

Ordinary exposed EPDM should not be treated as a finished terrace floor.

Drainage, Thresholds and Balustrades

A flat roof should not be completely level. BS 6229:2025 calls for a minimum finished fall of 1:80 across general roof areas and internal gutters, although steeper design falls may be needed to allow for deflection and construction tolerances.

Outlets must remain accessible, and paving or decking supports should not obstruct water flow. Emergency overflows and drainage channels may also be required, particularly near level-access doors.

Waterproofing will ordinarily need to rise approximately 150 mm above the finished terrace surface at walls and penetrations. Reduced door upstands require carefully designed drainage and waterproofing details.

Accessible roof edges also need suitable guarding. Balustrade posts should not simply be drilled through a finished membrane without a compatible waterproofing detail.

Planning a New Roof Terrace

Replacing an existing roof covering is different from converting a flat roof into an accessible terrace.

Planning permission may be required for a new balcony or raised platform. Consider overlooking, neighbour privacy, balustrades, access, and the building’s appearance. Listed buildings and properties in conservation areas may face additional requirements.

Building Regulations may also cover structural loading, guarding, fire performance, drainage, insulation and safe access.

Check these requirements before work begins.

Which System Should You Choose?

For a smaller terrace with an exposed finish, GRP or a traffic-rated liquid system may be suitable. Reinforced liquid waterproofing is often a strong choice for complex roofs and refurbishment work.

If you prefer paving or decking, a protected warm or inverted roof system may be the better overall arrangement. Mastic asphalt can work particularly well for steps and other hard-wearing areas, while single-ply, EPDM and built-up felt can provide reliable waterproofing when properly protected.

The best results come from designing the structure, drainage, waterproofing, walking surface, and safety features together.

Pellow Roofing can inspect the existing roof and recommend a system based on its condition, exposure, drainage and intended use. To discuss a roof terrace, balcony or flat roofing project, contact Pellow Roofing for a quote